Volgens de website van Wolf Tooth is de remote compatible met Hope Tech 3, welke ik heb als rem.
Het probleem:
Ik heb alles geïnstalleerd, echter zit de remote gewoon niet vast aan de rem. Heeft iemand dezelfde ervaring als mij?
Meer informatie:
Ik heb een dit gevonden:
https://forums.mtbr.com/components/wolf ... 42138.html
Hier hebben mensen exact dezelfde problemen.
Ik heb contact opgenomen met Wolf Tooth, zei geven aan dat je ander spare onderdelen kan kopen om het op te lossen. Of het gat van de koppeling uit te boren (Wolf Tooth gebruikt een M4 op een T-nut barrel, Hope gebruik een M5).
Op de website van Wolf Tooth staat letterlijk dat mijn rem compatible is:
Compatibility
•Compatible with ALL CABLE ACTUATED DROPPER POSTS!
•Mounting and Standard versus Light Action recommendation charts are below.
•If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard Remote will work best.
•Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
•If the barrel is normally at the remote, simply clip the barrel off and the cable will be "pinched" at both the post and the remote (no barrel needed)
•See picture carousel for comparison of the ReMote IS-II vs ReMote LA IS-II.
•ReMote IS-AB for Shimano works for some Hope Brakes. See details here
• Contact us for question on other post compatibility.